About “KENWOOD Music Editor”
This unit supports the PC application“KENWOOD Music Editor Light ver1.0”or later.
When you use the audio file with database information added by the“KENWOOD Music Editor
Light ver1.0,”you can search a file by title, album or artist name using Music Search.
In the Instruction manual, the term“USB device”is used to mean the device that contains audio
files with database information added with KENWOOD Music Editor.
“KENWOOD Music Editor Light ver1.0”is available from the following web site:
KDC-U449
For further information on“KENWOOD Music Editor Light ver1.0,”refer to the site above or the
application help.
KDC-U3049
KDC-U349
About Audio file
Playable Audio file:
KDC-U449/ KDC-U3049/ KDC-U349: MP3 (.mp3), WMA (.wma)
KDC-4051UM: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
KDC-4051UM
CIND-SRETCERIVUERCTION MANUAL
Although the audio files are complied with the standards listed above, the play maybe impossible
depending on the types or conditions of media or device.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.
This product complies with Directive, Number 26891 regarding“REGULATION ON THE RESTRICTION OF THE USE
OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.
“Made for iPod,”and“Made for iPhone”mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless
performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries.
The“AAC”logo is a trademark of Dolby Laboratories.
This symbol mark indicates that Kenwood manufactured this product so as to decrease
harmful influence on the environment.
© 2010 Kenwood Corporation All Rights Reserved.
GET0691-001A (MW/M2W/M0/M20)
Safety
CONTENTS
Safety
2
3
WARNING
Stop the car before operating the unit.
Preparation
How to attach/detach the faceplate
How to reset your unit
How to prepare the remote controller
(RC-405)
Important to know...
To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
Caution: Adjust the volume so that you
can hear sounds outside the car. Driving
with the volume too high may cause an
accident.
Condensation: When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors.
In this case, remove the disc and wait for
the moisture to evaporate.
Basic operations
Getting started
4
6
Canceling the display demonstration
Setting the demonstration mode
Adjusting the clock
Initial settings before operations
Listening to the radio
7
9
Changing the frequency steps
(KDC-U449/ KDC-U3049/ KDC-U349 only)
Adjust [SETTINGS] mode settings
This unit can only play the CDs with:
Listening to the other external components
Listening to a disc/ USB device/ iPod 10
The illustrations in this manual are
examples used to explain more clearly
how the controls are used. Therefore, what
appears on the illustrations may differ from
what appears on the actual equipment.
A USB connection cable, CA-U1EX (optional
accessory) is required for connecting a USB
device.
Start playing a disc
Direct Music Search using the remote
controller (RC-405)
Connecting a USB device
Connecting an iPod (KDC-U449 only)
Selecting Repeat Play
Selecting Random Play
Selecting Scan Play
You can connect an Apple iPod/iPhone
Selecting a folder/track/file
Functions of KDC-U449 with iPod
Alphabet Search and My Playlist for iPod
iPod control by Hand Mode
Adjust [SETTINGS] mode settings
with KDC-U449.
The word“iPod”appearing in this manual
indicates the iPod or iPhone connected
to this unit with a connection cable,
KCA-iP101 (optional accessory).
If you experience problems during
installation, consult your Kenwood dealer.
When you purchase external components,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
Function settings
Troubleshooting
Installation/connection
13
15
16
Basic procedure
Warning
Detailed information and notes about the
playable audio files are stated in an online
manual on the following site:
Caution
Wiring connection
Installing the unit
Removing the unit
Specifications
19
2
Preparation
How to attach/detach the faceplate How to prepare the remote
controller (RC-405)
When you use the remote controller for the
first time, pull out the insulation sheet.
1
1
Insulation sheet
2
2
Do not expose the faceplate to direct
sunlight, excessive heat, or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
Keep the faceplate in its casing while
detached.
The faceplate is a precision piece of
equipment and can be damaged by shocks
or jolts.
If the effectiveness of the remote
controller decreases, replace the battery.
3
4
2
To prevent deterioration, do not touch the
terminals of the unit and faceplate with
your fingers.
1
Caution:
Do not set the remote control in hot places
such as on the dashboard.
Lithium battery.
How to reset your unit
If this unit fails to operate properly, press the
reset button.
Danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
The battery pack or batteries shall not be
exposed to excessive heat such sunshine,
fire or the like.
Keep battery out of reach of children and in
original package until ready to use. Dispose
of used batteries promptly. If swallowed
contact physician immediately.
The unit returns to factory
settings when the reset
button is pressed.
Reset button
The marking of products using lasers
Remote controller (RC-405) is equipped
for KDC-U449/ KDC-U3049/ KDC-U349.
KDC-4051UM can also be remotely
controlled with an optionally purchased
remote controller.
The label is attached to the chassis/case
and says that the component uses laser
beams that have been classified as Class 1.
It means that the unit is utilizing laser
beams that are of a weaker class. There is
no danger of hazardous radiation outside
the unit.
3
Basic operations
Display window
KDC-U449:
KDC-U3049/ KDC-U349/ KDC-4051UM:
Remote sensor
Do not expose to bright sunlight.
Ejects the disc
Volume knob
Loading slot
Detaches the faceplate
The following indicator lights up when...
ST
IN
: A stereo broadcast is received.
: A disc is in the unit.
KDC-U449 only:
ATT (blink) : The sound attenuates.
EQ
: [SYSTEM Q] is set to an EQ
mode other than [NATURAL].
(page 13)
USB terminal
Auxiliary input jack
B.BOOST : [BASS BOOST] is set to [1] or
[2]. (page 13)
: In Search Mode or when a
Playlist is displayed.
KDC-4051UM only:
TI : Traffic Information function is turned
on.
RDS : Radio Data System service is available.
Muting upon the reception of a phone call
To use this feature, connect the MUTE lead to your telephone using a commercial telephone
accessory. (page 17)
When a call comes in, “CALL”appears.
The audio system pauses.
When a call ends, “CALL”
disappear.
To continue listen to the audio system during a call, press
SRC. “CALL”disappear and the audio system resumes.
The audio system resumes.
4
When you press or hold the following button(s)...
Remote
Main unit
General operation
controller
Turns on.
Turns off if pressed and held.
—
Selects the available sources (TUNER, USB or iPod, CD, AUX,
STANDBY), if the power is turned on.
• If the source is ready, playback also starts. “iPod” or “CD” is selectable
only when an iPod is connected or a disc is loaded.
Adjusts the volume level.
Selects items.
Confirms selection.
Enters [FUNCTION] settings.
SRC
SRC
VOL
Volume knob
(turn)
5
/
∞
ENT
Volume knob
(press)
—
Selects the FM bands (FM1/ FM2/ FM3), MW/ SW1/ SW2, or MW/
LW.
Selects the next/previous folder. (Pressing BAND on the main
unit can only select the next folders.)
Pauses/resumes playback of a disc/ USB device/ iPod.
Searches for a radio station.
AM– /
#FM+
*
BAND
6 (
)
ENT
+
¢
Selects track/file.
4
/
¢
4
/
Fast-forwards/reverses tracks if pressed and held. (Fast-forwards/
reverses cannot be performed using the remote controller.)
Changes the display information.
Scrolls the display information if pressed and held.
Enters clock adjustment mode directly (page 6) if pressed and
held while in clock display screen.
KDC-U449 only:
Selects“iPod”source.
Switches the controlling terminal (HANDS ON/ HANDS OFF) for
iPod playback if pressed and held. (page 12)
KDC-U3049/ KDC-U349/ KDC4051URM/ KDC-4051UGM only: Selects
Random Play. (page 11)
SCRL DISP
iPod
—
—
—
—
—
AUD
ATT
Enters [AUDIO CONTROL/ AUDIO CTRL] settings directly.
Attenuates the sound.
• To return to the previous level, press the button again.
Returns to the previous item.
Exit from setting mode.
EXIT
• Press and hold on the main unit will also exit from the setting
mode.
The illustration and button names used for explanation in this manual are of KDC-U449 (unless
mentioned otherwise). Refer to the table below for the difference:
KDC-U449 :
KDC-U3049/ KDC-U349/ KDC-4051UM :
iPod
3 (ALL RDM)
3
5 (MEMO MY LIST)
5
5
Getting started
Canceling the display
demonstration
Adjusting the clock
1
2
3
4
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to select [CLOCK],
then press to enter.
Turn the volume knob to select [CLOCK
ADJUST/ CLOCK ADJ], then press to
enter.
The display demonstration is always turned
on unless you cancel it.
When you turn on the power (or after you
reset the unit), the display shows:
[CANCEL DEMO] \ [PRESS] \
[VOLUME KNOB]
1
Press the volume knob.
[YES] is selected as the initial setup.
Press the volume knob again to confirm.
[DEMO OFF] appears.
If no operation is done for about
15 seconds or if you turn the volume knob
to select [NO] in step 2, [DEMO MODE]
appears and the display demonstration
starts.
Clock hour flashes on the display.
Turn the volume knob to adjust the
hour, then press to enter the minute
adjustment.
Clock minutes flashes on the display.
Turn the volume knob to adjust the
minute, then press to confirm.
2
5
6
7
Press 4
hour and minute adjustment.
Hold to finish the procedure.
/
¢ to move between the
Setting the demonstration mode
Press the volume knob to enter
[FUNCTION].
Turn the volume knob to select
[DEMO MODE], then press to enter.
Turn the volume knob to select [ON] or
[OFF].
If [ON] is selected, display demonstration
starts if no operation is done for about
20 seconds.
1
2
3
Initial settings before operations
1
2
Press SRC to enter [STANDBY] mode.
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[INITIAL SET], then press to enter.
Turn the volume knob to make a
selection, then press to confirm.
See table on page 7 for selection.
3
4
4
Hold
to finish the procedure.
5
Hold
to finish the procedure.
Maintenance
Cleaning the unit: Wipe off the dirt on the
panel with a dry silicon or soft cloth. Failure
to observe this precaution may result in
damage to the monitor or unit.
Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and
move outward.
Clean the disc with a dry silicon or soft
cloth. Do not use any solvents.
When removing discs from this unit, pull
them out horizontally.
Remove the rims from the center hole
and disc edge before inserting a disc.
Cleaning the connector: Wipe off dirt on
the connector of the unit and faceplate.
Use a cotton swab or cloth.
Handling discs
Do not touch the recording surface of the
disc.
6
Item
Selectable setting (Preset: *)
PRESET TYPE
NORMAL/ NORM*: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/
LW/ SW1/ SW2).; MIX: Memorizes one station for each preset button regardless of the selected band
(FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
KEY BEEP
ON*/ OFF: Activates/deactivates the keypress tone.
TDF ALARM
RUSSIAN SET
ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF*: Cancels
ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF*: Cancels.
P-OFF WAIT
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
––––: Cancels ; 20M*: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILT-IN AUX/ ON1*: Outputs sound of the connected external component through the car speakers when “AUX” is
BUILTIN AUX
selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is
selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no
external component is connected). Turn the volume knob clockwise to return to the previous volume level. ;
OFF: Disables “AUX” in source selection.
CD READ
1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SWITCH PREOUT/ REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on
SWITCH PRE
the rear of the unit (through an external amplifier).
SP SELECT
OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W UP xx.xx
YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated).
[TDF ALARM] is selectable only with KDC-U449/ KDC-U3049/ KDC-U349.
[RUSSIAN SET/ P-OFF WAIT] is selectable only with KDC-4051UM.
Listening to the radio
KDC-4051UM: Hold to turn on or off the Traffic Information function
(not applicable if“MW/ LW”is selected).
Hold for about 2 seconds to memorize the current station (or the selected Program Type for
KDC-4051UM). (Refer to [PTY SEARCH] on page 8 to select the Program Type.)
Press briefly to recall memorized station (or Program Type after entering the PTY search
mode for KDC-4051UM).
1
2
3
Press SRC to select “TUNER.”
Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
Press 4
/
¢ to search for a station.
Continued...
7
Changing the frequency steps (KDC-U449/ KDC-U3049/ KDC-U349 only)
You can change the frequency step of FM/ MW:
FM : 50 kHz to 200 kHz
MW : 9 kHz to 10 kHz
1
2
Press and hold SRC to turn off the power.
While pressing number buttons 1 and 5 (MEMO MY LIST), press SRC.
Release your fingers from the buttons after the display appears.
To restore the initial setting, repeat the same procedure.
When the frequency step is changed, the frequencies in the memory are deleted.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
2
3
Press the volume knob to enter [FUNCTION] mode.
Turn the volume knob to select [SETTINGS], then press to enter.
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4
Hold
to finish the procedure.
Item
Selectable setting (Preset: *)
LOCAL SEEK ON: Searches only stations with good reception (KDC-U449/ KDC-U3049/ KDC-U349: MW/ SW1/ SW2
stations only ; KDC-4051UM: FM stations only). ; OFF*: Cancels.
SEEK MODE Selects the tuning mode for
4
/
¢
buttons.
AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO
YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing
MEMORY
is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)
MONO SET
ON: Improves the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes).
PTY SEARCH Selects the available Program Type (page 9). Then, press
4
/
¢
to start searching.
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH*/ FRENCH/ GERMAN), then press to confirm.
NEWS SET
AF SET
00M – 90M: Sets the time for receiving the next news bulletin. ; OFF*: Cancels.
ON*: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; OFF: Cancels.
RDS REG
ON*: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
ATP SEEK
ON*: Automatically searches for a station with better reception when the traffic information's reception is
poor. ; OFF: Cancels.
[PTY SEARCH/ NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only for
KDC-4051UM.
[PTY SEARCH] is selectable only when the source is “FM.”
[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback
source is selected, these settings are selectable under [RDS SET] item. (page 14)
8
For KDC-4051UM:
Available Program Type:
SPEECH
DRAMA
MUSIC
CULTURE
LIGHT M (music) CLASSICS
NEWS
AFFAIRS
VARIED
INFO
SPORT
EDUCATE
SCIENCE
POP M (music) ROCK M (music) EASY M (music)
OTHER M (music) WEATHER
TRAVEL
FINANCE
JAZZ
CHILDREN
COUNTRY
SOCIAL
NATION M (music)
RELIGION
OLDIES
PHONE IN
FOLK M (music) DOCUMENT
LEISURE
The unit will search for the Program type categorized under [SPEECH] or [MUSIC] if selected.
[SPEECH] : White character item. ; [MUSIC] : Black character item.
The Radio Data System feature won’t work where the service is not supported by any
broadcasting station.
If the volume is adjusted during reception of traffic information, the adjusted volume is
memorized automatically. It will be applied the next time Traffic Information function is
turned on.
Using the remote controller (RC-405)
FM+ / AM– : Selects band.
4 / ¢ (+) : Selects station.
1 – 6
: Selects preset station.
Listening to the other external
components
Preparation : Make sure [ON1] or [ON2] is selected for [BUILT-IN AUX/ BUILTIN AUX].
(page 7)
1
2
Press SRC to select “AUX.”
Turn on the external component and
start playing.
Auxiliary input jack
3
Turn the volume knob to adjust the
volume.
3.5 mm stereo mini plug
(optional accessory)
Portable audio device
(optional accessory)
9
Listening to a disc/ USB device/ iPod
Ejects the disc. (“NO DISC”appears and“IN”indicator goes off.)
Press to select track/file.
Hold to fast-forwards/reverses.
USB terminal
Press to select next folder.
Slide open the cover.
Start playing a disc
1
2
Press SRC to turn on the power.
Insert a disc into the loading slot.
Playback starts automatically.
3
Press number button 6 (
resume/pause playback (if necessary).
) to
Connecting a USB
device
Direct Music Search using the
remote controller (RC-405)
• Not available if Random Play, Scan Play, or
CA-U1EX
(optional accessory)
iPod playback is selected.
1
Press DIRECT to enter Direct Music
Search Mode.
USB device (optional accessory)
“– – –” appears.
2
3
Press the number buttons to enter the
track number.
Press 4 / ¢ to search for the music.
Connecting an iPod
(KDC-U449 only)
To cancel the Direct Music Search Mode,
Apple iPod
press
or EXIT.
(optional accessory)
Using the remote controller (RC-405)
In playback mode:
FM+ / AM– : Selects folder.
4 / ¢ (+) : Selects track/file.
KCA-iP101
(optional accessory)
ENT
: Pauses/resumes playback.
In Music Search Mode:
ENT
5 / ∞
: Confirms selection.
: Selects folders/files.
: Returns to the previous folder.
The source automatically switches, and
playback starts.
10
To return to the root folder (or first track for
audio CD), press BAND.
Selecting Repeat Play
Press number button 4 (REP) repeatedly
to make a selection.
To return to the previous folder, press
.
To cancel the Music Search mode, press
Audio CD : TRACK/ TRAC (track) REPEAT,
REPEAT OFF
AAC (KDC-4051UM only)/MP3/WMA :
FILE REPEAT, FOLD (folder) REPEAT,
REPEAT OFF
and hold
.
< or > on the display indicates that
preceded/next item is available.
For USB device* and iPod: To skip search,
press 4 / ¢.
* This operation is effective only for the files
registered in the database created with
Kenwood Music Editor. (Refer to rear cover
of this manual.)
iPod : FILE REPEAT, REPEAT OFF
Selecting Random Play
Press number button 3 (ALL RDM) or
repeatedly to make a selection.
KDC-U449 only: To return to the top menu
while in the search mode of an iPod, press
BAND.
Audio CD : DISC RANDOM, RANDOM OFF
AAC (KDC-4051UM only)/MP3/WMA/iPod :
FOLDER/ FOLD (folder) RANDOM,
RANDOM OFF
Discs that cannot be used
Discs that are not round.
Press and hold number button
Discs with coloring on the recording
surface or discs that are dirty.
You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc
writing software, and your disc recorder
instruction manual.)
3 (ALL RDM) or
“ALL RANDOM.”
– Applicable only if“RANDOM OFF”is
selected initially.
to select
–
KDC-U449 only: Changes the iPod browsing
item to“songs.”
3-inch CD cannot be used. Attempt
to insert using an adapter can cause
malfunction.
Selecting Scan Play
Press number button 2 (SCAN)
repeatedly to make a selection.
Audio CD : TRACK/ TRAC (track) SCAN,
SCAN OFF
AAC (KDC-4051UM only)/MP3/WMA :
FILE SCAN, SCAN OFF
About USB device
This unit can play AAC (KDC-4051UM only)/
MP3/WMA files stored on a USB mass
storage class device.
If scan play is selected, the unit starts
playing the first 10-second intro of the
music in the disc/current folder.
If “SCAN OFF”is selected, the unit resumes
normal play of the current song.
Install the USB device in the place where
it will not prevent you from driving your
vehicle properly.
You cannot connect a USB device via a
USB hub and Multi Card Reader.
Make sure all important data has been
backed up to avoid losing the data.
Connecting a cable whose total length is
longer than 5 m can result in abnormal
playback.
Selecting a folder/track/file
1
Press
to enter Music Search mode.
“SEARCH” appears, then the current file
name appears on the display.
2
Turn the volume knob to select a folder/
track/file, then press to confirm.
11
Functions of KDC-U449 with iPod
Alphabet Search and My Playlist
for iPod
Playing a song on the playlist
1
Press number button 5 (MEMO MY LIST)
to display the playlist.
Selecting a song by alphabet
“MY PLAYLIST” appears.
1
2
3
Press
“SEARCH” appears.
Turn the volume knob to select a
category, then press to confirm.
Press
to enter Music Search mode.
2
Turn the volume knob to select the song
you want, then press to confirm.
Random play cannot be performed during
playback of a song in the playlist.
again to enter alphabet search
mode.
“SEARCH <
Deleting a song on the playlist
>” appears.
– – –
1
2
3
Press number button 5 (MEMO MY LIST)
to display the playlist.
“MY PLAYLIST” appears.
Turn the volume knob to select the song
you want to delete, then press and hold
the volume knob.
Turn the volume knob to select
“DELETE ONE” or “DELETE ALL,” then
press to confirm.
4
5
Turn the volume knob to select the
character to be searched for.
Press 4 / ¢ to move to the entry
position.
You can enter up to three characters.
Press the volume knob to start
searching.
To cancel the Alphabet Search mode, press
and hold
A longer searching time is required if there
are many songs or playlists in the iPod.
To search for a character other than A to Z
6
.
Select “DELETE ALL” to delete all the songs
in the playlist.
4
Turn the volume knob to select “YES,”
then press to confirm.
and 0 to 9, enter only“ ”.
The article (a, an, the) of songs name will
be skipped during search.
“COMPLETE” appears.
*
iPod control by Hand Mode
Registering songs in the playlist
Press and hold iPod to enter iPod mode.
1
Select and play the song you want to
register. (page 11)
Press and hold number button
5 (MEMO MY LIST) to register.
“## STORED” (registration number)
appears.
You can register up to 10 songs. “MEMORY
FULL” appears, if you try to register the
eleventh song.
If you attempt to register a song from
a different iPod, “NO INFO”followed by
“MPLIST DELETE”appears.
To delete the playlist, turn the volume knob
to select“YES,”then press to confirm.
You can also register the song displayed in
the Music Search mode by following the
same procedure.
HANDS ON :
Control iPod from the iPod. “iPod MODE”
appears on the display.
HANDS OFF: Control iPod from the unit.
2
Adjust [SETTINGS] mode settings
While listening to an iPod...
1
2
3
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to make a
selection, then press to confirm.
See table on page 13 for selection.
4
Hold
to finish the procedure.
Do not register Podcasts.
12
Functions of KDC-U449 with iPod
Item
Selectable setting (Preset: *)
SKIP SEARCH 0.5%*/ 1%/ 5%/ 10%: Sets the ratio of skip when searching for a song in Music Search mode.
(Holding 4 / ¢ skips songs at 10% regardless of the setting made.)
MPLIST DELETE YES: Deletes the saved My Playlist. ; NO*: Cancels.
About compatible iPod/iPhone
Made for
For the latest compatible list and software
version of iPod/iPhone, see:
If you start playback after connecting the
iPod, the music that has been played by
the iPod is played first.
– iPod touch (1st, 2nd, and 3rd generation)
– iPod classic
– iPod with video
– iPod nano (1st, 2nd, 3rd, 4th, and 5th
generation)
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
In this case, “RESUMING”is displayed
without displaying a folder name, etc.
Changing the browse item will display a
correct title, etc.
You cannot operate iPod if“KENWOOD”or
“✓”displayed on iPod.
Function settings
1
2
Press the volume knob to enter [FUNCTION] mode.
Turn the volume knob to select [AUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], then
press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
Repeat step 3 until the desired item is selected/activated.
Press
to return to the previous item.
4
Hold
to finish the procedure.
[AUDIO CONTROL/ AUDIO CTRL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL
BASS BOOST
SYSTEM Q
Selectable setting (Preset: *)
–15 — +15 (Preset: 0): Adjusts the subwoofer output level.
B.BOOST LV1*/ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
NATURAL*/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to
the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS ADJUST
BASS CTR FRQ/ BASS C FRQ: 60/ 80/ 100*/ 200: Selects the center frequency.
BASS LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
BASS Q FACTOR/ BASS Q FCTR: 1.00*/ 1.25/ 1.50/ 2.00: Adjusts the Q factor.
BASS EXTEND: ON: Turns on the extended bass. ; OFF*: Cancels.
Continued...
13
Item
MID ADJUST
Selectable setting (Preset: *)
MID CTR FRQ/ MID C FRQ: 0.5K/ 1.0K*/ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00*/ 1.25: Adjusts the Q factor.
TRE CTR FRQ/ TRE C FRQ: 10.0K/ 12.5K*/ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
TRE ADJUST
BALANCE
FADER
L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.
SUBWOOFER SET/ ON*: Turns on the subwoofer output. ; OFF: Cancels.
SUB-W SET
DETAILED SET/ LPF SUBWOOFER/ THROUGH*: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ:
DETAIL SET
LPF SUB-W:
Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
SUB-W PHASE:
REVERSE/ REV (180°) NORMAL/ NORM (0°)* Selects the phase angle
/
:
of the subwoofer output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER/ LPF SUB-W].)
SUPREME SET:
ON*: Creates realistic sound by interpolating the high-frequency components that
are lost in AAC/MP3/WMA audio compression. ; OFF: Cancels. (Selectable only
when playback an AAC/MP3/WMA file or a USB device, except iPod.)
VOLUME OFFSET/ –8 — +8 (for AUX) ; –8 — 0 (for other sources) Presets the volume adjustment
:
VOL OFFSET:
(Preset: 0)
level of each source. The volume level will automatically increase or decrease when
you change the source. (Before making an adjustment, select the source you want
to adjust.)
[SUB-W LEVEL/ SUBWOOFER SET/ SUB-W SET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if
[SWITCH PREOUT/ SWITCH PRE] is set to [SUB-W]. (page 7)
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is
set to [ON].
Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST].
[SETTINGS]
Item
Selectable setting (Preset: *)
AUX NAME SET/ AUX*/ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
AUX NAME
CLOCK
(Selectable only if “AUX” is selected as the source.)
CLOCK ADJUST/ CLOCK ADJ: (For details, see page 6.)
TIME SYNC: ON*: Synchronizes the Radio Data System station time data and the unit's clock. ;
OFF: Cancels.
DISPLAY
RDS SET
DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF: Cancels. (Preset: KDC-U449/KDC-U3049/ KDC-U349: AUTO ; KDC-4051UM: OFF)
NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable if any source other than tuner source is selected. (For
details, see page 8.)
[TIME SYNC/ RDS SET] is selectable only with KDC-4051UM.
14
Troubleshooting
Symptom
Remedy/Cause
Sound cannot be heard.
“PROTECT” appears and no
operations can be done.
Adjust the volume to the optimum level. / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with insulating tape
properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest
service center.
The unit does not work at all.
Reset the unit.
[P-OFF WAIT] does not work.
Exit from the demonstration mode. (page 6)
Radio reception is poor. / Static noise Connect the antenna firmly. / Pull the antenna out all the way.
while listening to the radio.
“IN” flashes.
The CD player is not operating properly. Reinsert the disc properly. If the condition did
not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back Insert a finalized CD-R/CD-RW (finalize with the component which you used for
and tracks cannot be skipped. recording).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Change the disc. / Check the cords and
connections.
“NA FILE” appears.
“NO DISC” appears.
“TOC ERROR” appears.
The unit is playing an unsupported audio file.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
disc instead.
“ERROR 99” appears.
The unit is malfunctioning for some reason. Press the reset button on the unit. If the
“ERROR 99” code does not disappear, consult your nearest service center.
A copy-protected file is played.
“COPY PRO” appears.
“READ ERROR” appears.
Copy the files and folders for the USB device again. If the error message is still displayed,
initialize the USB device or use other USB devices.
“NO DEVICE” appears.
No USB device is connected. Connect an USB device, and change the source to USB
again.
“NO MUSIC” appears.
“NA DEVICE” appears.
“USB ERROR” appears.
The connected USB device contains no playable audio file.
Connect a supported USB device, and check the connections.
Remove the USB device, turn the unit off, then turn it on again. If the unit still showing
the same display, try to connect another USB device.
Reconnect the iPod. / Confirm that the software for the iPod is the latest version.
Skip to another track or change the disc.
“iPod ERROR” appears.
Noise is generated.
Tracks cannot play back as you have Playback order is determined when files are recorded.
intended them to play.
“READING” keeps flashing.
Longer readout time is required. Do not use too many hierarchies and folders.
Elapsed playing time is not correct. This is caused by how the tracks are recorded.
The number of songs contained
in “SONGS” category of this unit
is different from that contained in
“SONGS” category of iPod.
Podcast files are not counted in this unit as this unit does not support the playback of
podcast files.
Correct characters are not displayed This unit can only display letters (upper case), numbers, and a limited number of
(e.g. album name).
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set
to [ON]. (page 7)
15
Installation/connection
Part list:
Caution
A Faceplate.............................................................. (×1)
If your car's ignition does not have an ACC
B Escutcheon......................................................... (×1)
C Mounting sleeve............................................. (×1)
D Casing for faceplate ...................................... (×1)
E Wiring harness.................................................. (×1)
F Removal tool..................................................... (×2)
KDC-U449/ KDC-U3049/ KDC-U349 only:
position, connect the ignition wires to a
power source that can be turned on and
off with the ignition key. If you connect
the ignition wire to a power source with
a constant voltage supply, as with battery
wires, the battery may die.
G Flat head screw (for Nissan cars)........... (×4)
H Round head screw (for Toyota cars).... (×4)
Do not use your own screws. Use only the
screws provided.
Install this unit in the console of your
vehicle. Make sure the faceplate will not hit
the lid of the console (if any) when closing
and opening.
After the unit is installed, check whether
the brake lamps, blinkers, wipers, etc. on
the car are working properly.
Basic procedure
1
Remove the key from the ignition
switch, then disconnect the · terminal
of the car battery.
2
Make proper input and output wire
connections.
\ “Wiring connection” (page 17)
Install the unit to your car.
\ “Installing the unit” (page 18)
Reconnect the · terminal of the car
battery.
Mount the unit so that the mounting angle
is 30° or less.
If the fuse blows, first make sure the wires
are not touching to cause a short circuit,
then replace the old fuse with one that has
the same rating.
3
4
5
Reset the unit. (page 3)
Connect the speaker wires correctly to the
terminals to which they correspond. The
unit may be damaged or fail to work if you
share the · wires or ground them to any
metal part in the car.
When only two speakers are being
connected to the system, connect the
connectors either to both the front output
terminals or to both the rear output
terminals (do not mix front and rear).
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
Warning
The unit can only be installed in a car with
a 12 V DC power supply, negative ground.
If you connect the ignition wire (red) and
the battery wire (yellow) to the car chassis
(ground), you may cause a short circuit,
that in turn may start a fire. Always connect
those wires to the power source running
through the fuse box.
Disconnect the battery's negative terminal
and make all electrical connections before
installing the unit.
Insulate unconnected wires with vinyl tape
or other similar material. If no connections
are made, do not let the wire come out
from the tab to prevent short circuit.
Be sure to ground this unit to the car's
chassis again after installation.
Mounting and wiring this product requires
skills and experience. For safety's sake, leave
this work to professionals.
If you experience problems during
installation, consult your Kenwood dealer.
16
Wiring connection
KDC-U449
KDC-U3049/ KDC-U349/ KDC-4051UM
Front output terminals
Rear/subwoofer output terminals
Fuse (10 A)
Rear/subwoofer output terminals
KDC-U449/
KDC-U3049/
KDC-U349
Antenna terminal
(JASO)
KDC-4051UM
Except for KDC-U3049: To the steering wheel remote control
adapter (optional accessory)
Light blue/yellow
(Steering remote control wire)
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Brown
(Mute control wire)
KDC-U449/ KDC-U3049/ KDC-U349
/ White/black : To front speaker (left)
/ Gray/black : To front speaker (right)
: To rear speaker (left)
White
ª
·
·
·
Gray
ª
Green
Purple
ª
ª
/ Green/black
/ Purple/black
·
: To rear speaker (right)
Blue
To the antenna control terminal in the vehicle.
(Motor antenna control wire)
To the power control terminal when using the optional power
amplifier.
Blue/White
(Power control wire)
Car fuse box
Ignition key switch
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Car fuse box
Battery
To the metallic body or chassis of the car
KDC-4051UM
Blue/White
(Power control/motor antenna
control wire)
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
Red (A7)
Red (Ignition wire)
Yellow (A4)
Yellow (Battery wire)
See also “Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles” on
page 18.
ISO connectors (page 18)
17
ISO connectors
Pin
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
Color and function
A4
A5
A7
A8
Yellow
Blue/White
Red
Battery
Power control
Ignition (ACC)
Earth (ground) connection
harness as illustrated below.
Ignition wire
A7 (Red)
(Red)
Black
B1 / B2 Purple
ª
/ Purple/black
·
Rear speaker (right)
Unit
Vehicle
B3 / B4 Gray
B5 / B6 White
B7 / B8 Green
ª
ª
ª
/ Gray/black
/ White/black
/ Green/black
·
Front speaker (right)
Front speaker (left)
Rear speaker (left)
Battery wire
(Yellow)
A4 (Yellow)
·
Default wiring
·
Installing the unit
1
Connect the wiring harness to the unit. Other
wiring connection has been completed earlier.
(page 17)
Before attaching, make sure the direction of
the escutcheon is correct.
2
Dashboard of your car
(Wider hooks on the top side.)
Bend the appropriate tabs
to hold the mounting sleeve
firmly in place.
Installing without using the mounting sleeve (Japanese car)
(KDC-U449/ KDC-U3049/ KDC-U349 only)
1
Remove the mounting sleeve and
escutcheon from the unit.
2
Align the holes in the unit (on both sides)
with the vehicle mounting bracket and
secure the unit with the supplied screws.
T: Toyota cars
N: Nissan cars
Removing the unit
1
Detach the faceplate.
2
Engage the catch pin on the removal tools into
the holes on both sides of the escutcheon, then
pull it out.
3
Insert the removal tools deeply into the slots on
each side, then follow the arrows instructions as
on the right.
18
Specifications
Subject to change without notice.
Spindle speed: 500 rpm — 200 rpm (CLV)
Wow & Flutter: Below Measurable Limit
Frequency response ( 1 dB): 20 Hz — 20 kHz
Total harmonic distortion (1 kHz): 0.01 %
Signal-to-Noise ratio (1 kHz): 105 dB
Dynamic range: 90 dB
MP3 decode: Compliant with MPEG-1/2 Audio Layer-3
WMA decode: Compliant with Windows Media Audio
KDC-4051UM only:
KDC-U449/ KDC-U3049/ KDC-U349 only:
FM tuner section
Frequency range:
200 kHz space: 87.9 MHz — 107.9 MHz
50 kHz space: 87.5 MHz — 108.0 MHz
Usable sensitivity (S/N= 26 dB):
11.2 dBf (1.0 μV/75 Ω)
Quieting sensitivity (DIN S/N = 46 dB):
19.2 dBf (2.5 μV/75 Ω)
Frequency response ( 3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
AM tuner section
AAC decode: AAC-LC“.m4a”files
USB interface
USB standard: USB1.1/ 2.0 (Full speed)
Maximum supply current: 500 mA
File system: FAT16/ 32
MP3 decode: Compliant with MPEG-1/2 Audio Layer-3
WMA decode: Compliant with Windows Media Audio
KDC-4051UM only:
Frequency range:
Band 1 (MW):
10 kHz space: 530 kHz — 1 700 kHz
9 kHz space: 531 kHz — 1 611 kHz
Band 2 (SW1): 5 kHz space: 2 940 kHz — 7 735 kHz
Band 3 (SW2):
5 kHz space: 9 500 kHz — 10 135 kHz /
11 580 kHz — 18 135 kHz
Usable sensitivity (S/N= 20 dB):
MW: 31 dBμ (36 μV) / SW: 32 dBμ (40 μV)
AAC decode: AAC-LC“.m4a”files
Audio section
Maximum output power: 50 W × 4
KDC-U449/ KDC-U3049/ KDC-U349 only:
Full bandwidth power (at less than 1 % THD):
22 W × 4
KDC-4051UM only:
FM tuner section
KDC-4051UM only:
Output power (DIN 45324, +B = 14.4 V): 30 W × 4
Speaker impedance: 4 Ω — 8 Ω
Tone action: Bass: 100 Hz 8 dB
Middle: 1 kHz 8 dB
Treble: 10 kHz 8 dB
Preout level / load (CD): 2 000 mV/10 kΩ
Preout impedance: ≤ 600 Ω
Frequency range (50 kHz space): 87.5 MHz — 108.0 MHz
Usable sensitivity (S/N = 26 dB): 1.0 μV/75 Ω
Quieting sensitivity (DIN S/N = 46 dB):
2.5 μV/75 Ω
Frequency response ( 3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
MW tuner section
Auxiliary input section
Frequency range (9 kHz space): 531 kHz — 1 611 kHz
Usable sensitivity (S/N = 20 dB): 36 μV
LW tuner section
Frequency response ( 3 dB): 20 Hz — 20 kHz
Input maximum voltage: 1 200 mV
Input impedance: 10 kΩ
Frequency range: 153 kHz — 279 kHz
Usable sensitivity (S/N = 20 dB): 57 μV
General
Operating voltage (11 V — 16 V allowable): 14.4 V
Maximum current consumption: 10 A
Installation size (W × H × D):
182 mm × 53 mm × 158 mm
Weight: 1.3 kg
CD player section
Laser diode: GaAIAs
Digital filter (D/A): 8 Times Over Sampling
D/A converter: 24 Bit
19
|