Kompernass Paper Shredder KH4407 User Manual

6
SHREDDER  
KH4407  
Shredder  
Operating instructions  
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH4407-01/10-V2  
 
CONTENT  
PAGE  
Intended Use  
2
2
3
3
3
3
3
4
5
5
5
6
6
Important safety instructions  
Technical data  
Items supplied  
Appliance description  
Commissioning  
Operation  
Emptying the waste container  
Cleaning  
Disposal  
Warranty & Service  
Importer  
Troubleshooting  
Read these operating instructions carefully before using the appliance for the first time and preserve this  
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.  
Download from Www.Somanuals.co-m1.-All Manuals Search And Download.  
SHREDDER KH 4407  
To avoid the risk of personal injury:  
• The Shredder should be used by only one per-  
son at a time.  
Intended Use  
• Never leave the appliance unsupervised during  
use.  
This Shredder is intended exclusively for the  
shredding of paper, credit cards and CD’s.  
All other usages or modifications are regarded  
as contrary to the operating instructions and  
contain a considerable risk of accidents.  
• Keep loose clothing  
, long hair  
and jewel-  
lery etc well away from the cutter opening.  
• NEVER place your fingers into the cutter opening  
.
• NEVER place a finger into the central hole of a  
CD when you are feeding it into the appliance.  
• Keep pets away from the appliance. They could  
injure themselves.  
• This appliance is not intended for use by individuals  
(including children) with restricted physical,  
physiological or intellectual abilities or deficiences  
in experience and/or knowledge unless they are  
supervised by a person responsible for their safety  
or receive from this person instruction in how the  
appliance is to be used.  
• The packaging material can be a source of dan-  
ger for children. Dispose of the material immedi-  
ately after unpacking or keep it in a safe place  
not accessible to children.  
ƽ Important safety instructions  
The following safety instructions must always be  
complied with when using electrical appliances:  
• Do not place the appliance in close vicinity to  
sources of heat and water source .  
• Do not use the appliance close to inflammable  
or explosive materials and/or ignitable gases  
or in dusty environments.  
• Do not use the appliance outdoors.  
To avoid potentially fatal electric  
shocks:  
• Should the power cable or the plug become  
damaged, arrange for it/them to be repaired  
by authorised specialists or Customer Services  
as soon as possible.  
• Lay the power cable in such a way that no one  
can tread on or trip over it.  
• Arrange for damaged or malfunctioning applian-  
ces to be inspected and/or repaired by a quali-  
fied specialist or the Customer Service Depart-  
ment as soon as possible.  
• Do not expose the appliance to rain and never  
use it in a humid or wet environment.  
• Ensure that the power cable never becomes  
moist or wet during operation.  
 
- 2 -  
Tips for safety:  
Appliance description  
• Place the appliance in the immediate vicinity of  
an electrical power socket. Do not use an exten-  
sion cable. Ensure that the appliance and the po-  
wer socket are easily and quickly accessible in  
the event of an emergency.  
Cutter attachment  
q
w
e
r
t
y
u
Switch  
Cutter opening for CD/Credit cards  
Cutter opening for paper  
Large waste receptacle (Paper)  
Power cable  
• Never overburden the appliance. The paper  
shredder is designed for brief operating  
periods.  
• In cases of danger, immediately remove the elec-  
trical plug from the socket.  
Small waste receptacle (transparent) /  
Viewing window  
• NEVER use the shredder for tasks for which it  
was not designed.  
• Always be attentive! Always pay attention to  
what you are doing and act with common  
sense. Never use the appliance when you are  
distracted or don’t feel well.  
Commissioning  
• First of all, place the cutter attachment  
onto  
so that the power  
q
the large waste receptacle  
t
cable  
side.  
is located at the rear, i.e. on the closed  
y
• Slide the small waste receptacle  
for plastics  
u
Technical data  
in the opening on the front side of the large wa-  
ste receptacle  
.
t
Mains voltage:  
Nominal current: 1,8 A  
Rated output: 380 W  
220-240 V 50Hz  
• Connect the paper shredder to a power socket.  
~
Protection class: II  
Cutting process  
Operation  
for Paper:  
Crosscut, 4x18 mm particles  
Switching the appliance on:  
Working width: 223 mm  
• Place the switch  
shredding.  
to the position  
for  
w
CO Time:  
3 minutes  
CO Time  
Inserting paper:  
The C.O. Time (Continuous Operation) details how  
long an appliance may be used without the motor  
overheating and being damaged. After the appliance  
has run for for this period it must be switched off until  
the motor has cooled itself down.  
• Insert paper from above and in portrait format  
into the cutter opening for paper  
.
r
The motor starts automatically and switches itself off  
automatically if no further paper is inserted. You  
can shred up to 7 sheets (80g/m2 paper) at the  
same time.  
Items supplied  
Shredder KH 4407  
Operating Instructions  
Download from Www.Somanuals.co-m3.-All Manuals Search And Download.  
Inserting credit cards:  
• Open the safety flap over the cutter opening for  
Emptying the waste container  
CD/Credit cards  
.
• Empty the waste container  
/
regularly.  
e
t u  
• Insert the credit card from above into the middle  
• Dispose of the waste material in an environmen-  
tally responsible manner.  
of the CD/Credit card cutter opening . You  
e
can only shred one credit card at a time. ALWAYS  
insert them into the CD/Credit card cutter opening  
Emptying the large waste container  
(Paper)  
with the broad side leading. If you do not,  
e
the magnetic strip will not be destroyed.  
ƽ Important: Remove the power plug from the  
wall socket to avoid an unintended starting of the  
appliance.  
Note: Always insert the credit card into the  
middle of the cutter opening . If you do not,  
e
the shredding process will not start!  
• Remove the cutter attachment  
from the large  
q
Note: Should you need to be absolutely sure  
that the information on the magnetised strip  
has been irrevocably destroyed, insert the cre-  
dit card into the middle of the cutter opening  
waste container  
• Remove the small waste container  
.
t
at the front  
u
of the large waste container , so that it does  
not fall out.  
t
for paper  
.
• Empty the large waste container  
everything back together again.  
and then put  
r
t
Take note that the waste will then fall into the  
large collection container . If need be, emp-  
t
ty if first, so as to ensure an easier separation  
Emptying the small waste container (Plastic)  
of paper and plastic waste..  
• Remove the small waste container  
front of the large waste container  
• Replace it after emptying it.  
from the  
to empty it.  
u
t
Inserting a CD:  
ƽ Warning!: NEVER place a finger into the cen-  
tral hole of a CD when you are feeding it into  
the appliance.  
Notice regarding overheating of the  
appliance:  
• Insert the CD from above into the middle of the  
If it overheats, the appliance switches itself off  
automatically.  
CD/Credit card cutter opening . You can only  
e
shred one CD at a time.  
ƽ Important: Remove the power plug from the  
wall socket to avoid an unintended starting of  
the appliance.  
Clearing a material blockage:  
• Press and hold the switch in position should  
w
the item to be shredded become jammed.  
The appliance now goes into reverse and the  
material to be shredded is returned.  
• To switch the appliance off, move the switch  
w
into the middle position  
(OFF).  
• Place the switch  
into position  
(OFF) as  
• Empty the waste containers  
/
.
w
t u  
soon as the jammed item is returned.  
• Allow the appliance to cool down.  
• Reinsert the power plug into the socket.  
• Switch the appliance on, in that the switch  
Switching the appliance off:  
w
• To switch the appliance off, move the switch  
is placed in the position  
.
w
into the middle position  
(OFF).  
 
- 4 -  
Cleaning  
Warranty & Service  
ƽ Danger! Always remove the power plug  
before cleaning the appliance. There is a  
risk of electric shock!  
The warranty for this appliance is for 3 years from  
the date of purchase. The appliance has been ma-  
nufactured with care and meticulously examined be-  
fore delivery. Please retain your receipt as proof of  
purchase. In the event of a warranty claim, please  
make contact by telephone with our Service Depart-  
ment. Only in this way can a post-free despatch for  
your goods be assured.  
The warranty covers only claims for material and  
maufacturing defects, but not for transport damage,  
for wearing parts or for damage to fragile compo-  
nents, e.g. buttons or batteries. This product is for  
private use only and is not intended for commercial  
use. The warranty is void in the case of abusive and  
improper handling, use of force and internal tampe-  
ring not carried out by our authorized service  
branch. Your statutory rights are not restricted in  
any way by this warranty.  
ƽ Warning!! The cutters in the appliance are  
very sharp! Risk of personal injury!  
• Empty the waste containers  
• Clean the waste containers  
/
regularly.  
and the cutter  
t u  
/
t u  
attachment  
with a lightly moistened cloth  
q
and, if required, with a mild detergent.  
• Remove possible residues in the cutter openings  
/
with a suitable object. Ensure that the appli-  
e r  
ance is unplugged before commencing this!  
Disposal  
Do not dispose of the appliance in your  
normal domestic waste. This product is  
subject to the European guideline  
2002/96/EC.  
The warranty period will not be extended by repairs  
made under warranty. This applies also to replaced  
and repaired parts. Any damage and defects extant  
on purchase must be reported immediately after un-  
packing the appliance, at the latest, two days after  
the purchase date. Repairs made after the expira-  
tion of the warranty period are subject to payment.  
Dispose of the appliance through an approved dis-  
posal centre or at your community waste facility.  
Observe the currently applicable regulations.  
In case of doubt, please contact your waste disposal  
centre.  
DES UK LTD  
Tel.: 0871 5000 700 (£ 0.10 / minute)  
Dispose of all packaging materials in an  
environmentally responsible manner.  
Kompernass Service Ireland  
Tel: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may vary.  
Download from Www.Somanuals.co-m5.-All Manuals Search And Download.  
Importer  
If the appliance doesn`t allow itself to be  
switched on:  
KOMPERNASS GMBH  
BURGSTRASSE 21  
• Check that the plug is correctly connected to a  
wall socket.  
44867 BOCHUM, GERMANY  
• Try out a different wall socket.  
• The appliance is probably defective. Have the  
appliance checked by qualified specialists.  
When the appliance is switched on,  
however, the shredding process will not start:  
• The appliance has overheated and triggered the  
automatic safety switch-off.  
Troubleshooting  
If the material to be shredded jams:  
This means that you have attempted to feed too  
much material into the appliance  
(max. 7 sheets 80g/m2 paper, max. 1 credit card,  
max. 1 CD/DVD).  
ƽ Important: Remove the power plug from the  
wall socket to avoid an unintended starting of  
the appliance.  
• Place the switch  
in position should the item  
w
to be shredded become jammed. The appliance  
now goes into reverse and the material to be  
shredded is returned.  
• To switch the appliance off, move the switch  
w
into the middle position  
(OFF).  
• Allow the appliance to cool down.  
• Place the switch  
in position  
(OFF), as  
• Replace the power plug into the socket.  
• Switch the appliance on, in that the switch  
w
soon as the jammed item is returned.  
w
is placed in the position  
.
If the appliance suddenly ceases operation:  
This means that the appliance has overheated and  
the automatic safety cut-out has activated itself.  
The cutter attachment is not correctly placed.  
q
• Place the cutting attachment  
in the correct  
q
position.  
ƽ Important: Remove the power plug from the  
wall socket to avoid an unintended starting of  
the appliance  
• To switch the appliance off, move the switch  
w
into the middle position  
(OFF).  
• Allow the appliance to cool down.  
• Reinsert the power plug into the socket.  
• Switch the appliance on, in that the switch  
w
is placed in the position  
.
 
- 6 -  

Jacuzzi Hot Tub EV95 User Manual
Jenn Air Cooktop W10298937A User Manual
Jenn Air Dishwasher W10300219A User Manual
JVC Digital Camera GR DV4000 User Manual
JVC Stereo Amplifier KS AX5500 User Manual
Kenmore Oven 22 48832 User Manual
Kodak Digital Camera M381 User Manual
Kompernass Bread Maker SBB 850 EDS A1 User Manual
Kompernass Indoor Furnishings KH4063 User Manual
Kowa Telescope RB 525 B04 User Manual