EasyStart
Pa800 Main Features
•
RX Technology- the Pa800 Real eXperience means up to SIXTEEN
oscillators per program, with multi-level dynamics and extensive real-
time control… The realism is unparalleled
•
Songbook feature lets you create a searchable database of your
Performance settings- by title, artist, tempo, key- and instantly
recall one to recreate that song. A SongBook entry can also be a
MIDI file on a USB PenDrive!
•
•
•
•
Color TouchView Interface is incredibly EASY TO USE… you’ll be
navigating through the Pa800 in no time
•
•
Multi-Channel Backing Sequencer to instantly record up to 8
backing tracks and up to four real time tracks – each to a
separate track - all in one pass!
New Easy Mode displays the most frequently-used controls, so you’re
always in command of your favorite features!
XDS Dual Sequencer allows you to cue one song while you’re
playing a different one… The crossfader allows smooth or
immediate transitions from one song to the next, creating a
seamless performance every time
Huge collection of pristine sample data provides over 1000 factory
sounds with Korg’s legendary programming
Enhanced Style Functions – 544 Style locations (419 pre-loaded)
Styles can be up to 32 bars long, with 3 intros, 3 fills, 4 variations and
3 endings. Tap-Tempo, Reset & Fade in/out
•
•
•
TC Helicon vocal processing works with the onboard mic input
for powerful effects and three-part harmony
•
•
•
16-Bit/48kHz Sampling (64 MB RAM) with Auto Time Slice/Extend
and more editing functions. Loads AIFF, WAV, Korg and AKAI® data.
USB computer connectivity, plus two USB 2.0 Host ports for
various media storage
A real effects powerhouse, with over 100 different effects, including
Powerful onboard stereo speakers, and 4 assignable outputs
Korg’s acclaimed REMS guitar-based effects!
for flexible routing – perfect for recording or PA applications
320 programmable Performance settings let you recall your
favorite settings at the touch of a button
EasyStart CONTENTS
Welcome!
2
2
3
3
4
5
5
6
6
7
8
Making Connections; Working with the TouchView User Interface
Easy Mode; Playing the Demo Songs
Playing Sounds
Selecting, Playing and Controlling Styles
Suggested Styles to Work With
Saving Your Settings (Performances)
Quick Recording with the Backing Sequencer
The SongBook; Using the TC-Helicon Voice Processor
Owner’s Manual References
Available Options
Pa800 EasyStart
Easy Mode
Are you viewing more on-screen information than you need? Try going from Expert Mode to Easy Mode! Touch
the drop-down Page menu in the upper-right corner of the display, and select “Easy Mode”. This mode will show
you what’s assigned to the Single Touch Setting buttons, and it will give you a shortcut to the lyrics in Song Play
mode. It also displays the status of a microphone connected to one of the audio inputs. If you’re just starting with
the Pa800, try this mode to get comfortable with playback of Styles and Songs. Later on, you can return to Expert
Mode, where all Pa800 performance and editing functions are available to you.
Playing the Demo Songs
3. Press both the STYLE PLAY and SONG PLAY buttons. Demos will automatically start to play, however you can also
select Solo Instrument, Style or Full Song demos by pressing the appropriate box in the display, and then selecting
the desired demo from the list.
4. Press the EXIT button to return to the main demo page, where you can select a different demo category.
5. Exit Demo Play mode by pressing the STYLE PLAY button.
Playing Sounds
The Pa800 utilizes Korg’s amazing RX (Real eXperience) technology and sound engine from the flagship Pa1x-
series instruments… and that same sound engine powers Korg’s new flagship workstation, the M3! With the Pa800,
you can use up to sixteen oscillators per sound to create guitar slides, harmonics and pull-offs, flute overblow,
frulatto, and many other beautiful nuances. This means that your acoustic instruments will sound incredibly
realistic, and you can authentically recreate an entire orchestra worth of instruments using just a few keys! Let’s
experiment with a few of these sounds…
1. Press the SOUND mode button. Here you can try out and play individual sounds. In this mode the sound will be played
across the entire keyboard and will be heard solo without a Style accompaniment.
2. Grand Piano should be the currently selected sound. This is indicated in the “Sound Info” area at the upper part of the
display. Touch this and you’ll be able to search for sounds by category. Within the piano category, try the Grand Piano
RX sound. You can hear the hammers return when you remove your finger from a key, just like a real piano… and with a
damper pedal attached, you’ll notice string and damper resonance! Try pressing down on the pedal without playing
keys… You can even hear the damper by itself!
3. Press the DISPLAY HOLD button at this point, so that you can keep searching through sounds uninterrupted…
4. Press the “Guitar” tab, and then press “Nylon Slide Pro” to select this sound. Play the keyboard with varying degrees
of velocity (light, medium and hard) to hear the different guitar articulations, including a very cool slide!
5. Now select one of the great trombone sounds using this alternate method of selecting sounds: Press the SOUND
SELECT BRASS button to the right of the display, and then select “Big BandShake Y+”. Play a chord, and move the
joystick up for a great jazzy shake!
6. Press the SOUND SELECT WOODWIND button (press the E. PIANO button, and then press the button to the left of
PIANO to switch to the bottom row) and select “Flute Frulatto”. Try this at various velocities. Play softly, and you get
a tasty frulatto… Hit it hard for a percussive overblow.
7. Press the SOUND SELECT DIGITAL DRAWBARS button. This is Korg’s world-renown DSP organ modeling in action!
You’ve got rotary speaker emulation, switchable percussion and foot control.
a. Try speeding up/slowing down the rotary speaker by pushing the Joystick Y+ (push it upwards)!
!
In STYLE PLAY mode (Explored in the next section); up to four sounds can be combined together!
3
Pa800 EasyStart
Selecting, Playing and Controlling Styles
A Style consists of up to four performance instruments, with up to eight accompaniment tracks playing in the
background. This is where the Pa800’s serious power really shows!
To begin, choose a Style (see the list on the next page for some recommendations). Styles can be
selected just like Sounds. Use the STYLE SELECT buttons on the left side of the keyboard, and choose a
“Category” in the display. You can also touch the name of the current “Style” in the display. You can press the
STYLE SELECT button repeatedly, to scroll through tabs, or just touch the display to select them.
Press the STYLE SELECT POP/LATIN DANCE, then press the button to the left of the STYLE SELECT
buttons to select the bottom row (LATIN DANCE). On the display, touch the P2 tab, followed by “Gipsy
Dance.” Now follow these steps to get comfortable controlling your music:
1. While playing a Style, you have up to three realtime tracks layered on the upper half of the keyboard, and one lower
track. All of these can be muted and un-muted in the display (a yellow “M” means mute, a green “P” means play. Just
touch as desired to change! Press the green “P” on the lower left, above “DR/PERC” to quickly mute all the drums and
percussion! Press it again to un-mute.
2. There are three Intros. Press SYNCRO START to have the Style play whenever you play a left-hand chord, and press
INTRO 1, 2, or 3, and then press on of the VARIATION buttons to choose the one that will play after the selected
INTRO is finished playing.
- INTRO 1 will provide a musical introduction, with a preset chord progression that begins and ends with the
chord you played.
- INTRO 2 plays a similar introduction to INTRO 1, but will use the chords you play.
- INTRO 3 plays a quick count-in.
Press Intro 1, play a chord, and push the big red START/STOP button.
3. The four VARIATION buttons begin with a “less is more” feel at VARIATION 1, and get more complex up through
VARIATION 4. When you press a new VARIATION button, the selected VARIATION will not start immediately – it will
begin once the previous variation ends its pre-programmed riff.
Switch from one VARIATION to the next, and notice the difference!
4. The three ENDING buttons work in the same way as the INTRO buttons. The first is long, the second is shorter, and
the third is very quick! No matter how quickly you have to pass the mic to someone else, you can still get out gracefully!
If you need to stop immediately, just press the START/STOP button. You can also use the FADE IN/OUT button to…
well… fade in or out.
Press ENDING 1 to hear a great progression featuring some excellent guitar strumming! Start the beat back
up with a chord and that big red START/STOP button.
5. Below and to the right of the display is the ENSEMBLE button. Press this, and the Pa800 will automatically harmonize
your right hand along with the accompaniment!
While the Style is playing, press the ENSEMBLE button and play with your right hand, while changing chords
with the left.
6. On the right side, there are four PADS. These can trigger sound effects, as well as SEQUENCES!!
Press the four PAD buttons to bring more instruments into the Style… If it’s melodic, it will play along with
your chords. If it’s rhythmic, it will automatically play with the beat!
7. On the upper-right side of the keyboard, you have CHORD SCANNING and KEYBOARD MODE buttons. CHORD
SCANNING selects where the Style looks to see the chord you’re playing. Push both at the same time to use the whole
keyboard. The KEYBOARD MODE buttons let you choose whether you want to split the keyboard into upper and lower
sounds, or just use the entire keyboard for the main sound.
4
Pa800 EasyStart
Press the UPPER button to have the style react to chords in the right hand, and then press FULL UPPER to
spread the guitar sound all across the keyboard.
8. Below and to the left of the display are three more controls: MEMORY, BASS INVERSION, and MANUAL BASS.
MEMORY, when lit, will keep the accompaniment playing when you take your hands off the keys. BASS INVERSION,
when lit, will use the lowest note in the chord you played as the root. MANUAL BASS is just that…. It drops the bass
line, and assigns the left side of the keyboard to the bass sound that’s built into the chosen Style. And when you enable
MANUAL BASS, the Style stops playing; just the drums continue.
Try the MANUAL BASS button while the Style is playing, and take a bass solo with your left hand!
9. Right beneath the display are four SINGLE TOUCH SETTINGS (STS). Each one of these can completely change the
sounds you’re playing, as well as the effects and vocal settings. Are they programmable? Of course. Are they preset for
every style? You bet!
a. In Easy Mode, you can see what sound you’ll be playing for each STS right on the main display! You can also
see this by touching the “STS” tab at the bottom of the display.
Press STS3 to switch to the “Nylon Slide Pro” sound.. Try pressing a key with high velocity for a string slide!
10. To change the tempo, press and hold the SHIFT button and rotate the TEMPO/VALUE dial. You can also use the
TEMPO LOCK button to maintain the same tempo when you switch to a new Style.
Turn the dial up to give your dancers a workout!
11. Don’t forget the X/Y JOYSTICK, ASSIGNABLE SLIDERS and ASSIGNABLE SWITCHES! These controllers are all
totally programmable, and can do some unexpected things! For example, may styles use the switches for a ritardando or
accelerando, or use switch #2 as a talkover mute!
Set the ASSIGNABLE SLIDERS to “ASSIGN. B” using the SLIDER MODE button, and then manipulate the
sliders to change the tone of the guitar!
Cool Tip:
For almost all of the above functions, you can change settings simply by holding down the SHIFT button and
pressing the button you want to modify!
Cool Tip:
Use a complex chord (7th, sus2, sus4, etc.) when playing Styles – the Style playback will vary to fit your
voicing! This goes way beyond just changing keys… You might get a differently-structured bass line, or a slight
drum variation to fit a suspended chord. This goes for Intros, Endings, Variations AND Fills! It’s one of the
many subtle ways that the Pa800 makes your performance more musical.
Try Working with these Styles:
NAME
BANK / PAGE
VARIATION
STS #
TEMPO
TIPS
Guitar Bossa
Latin
All
1,3
132
Girl from where? Try STS3 for a nylon guitar.
Gospel Shuffle
Cartoon Time
Mystery Man
Funk & Soul
All
4
All
1
180
160
147
Check out Ending 1… I feel a HEALIN’ comin’
on!
Movie & Show p2
Movie & Show p2
A pie-flinging good time… Recommended for
chase scenes.
4
1
Oh, beHAVE! Variation 2 gives you that great
VOX organ sound!
Blues
Funk & Soul p2
Unplug.
1
All
All
119
94
Check out the Fills… then take it to the bridge!
Unplugged Ballad1
All
Slow-dancers like this Style more than words
can really say ☺
Django
Jazz p2
All
All
106
Variation 2 brings in Stephan to help out!
5
Pa800 EasyStart
Saving your settings (Performances)
When you find a Style that you like, and have selected sounds that you enjoy using with that particular Style, you
can save all of these settings together as a Performance. Other settings saved with a Performance are the tempo,
any needed effects and transpositions and the Vocal Processor preset and volume settings. Up to 320
Performances can be saved to internal memory!
1. To save a Performance, press the STYLE PLAY mode button. Press the ▼popup in the upper right of the display and
select “Write Performance”.
2. You can name your Performance by pressing the T next to “Name:”, and entering characters in the display. When
finished, press “OK”.
3. For now, let’s select an empty user location to save your performance, so that you don’t overwrite the presets.
4. For “Perf. Bank:” select 19 – User 2. Next, for “Performance:” select “08-empty”, and then press “OK”.
Quick Recording with the Backing Sequencer
The Backing Sequencer (Quick Record) function lets you record a Style with all of its elements quickly and easily.
This is a great feature for getting ideas down, as well as taking advantage of the wonderfully-programmed Styles
for writing songs.
1. Press the STYLE PLAY button, and select the desired Style.
2. Press the SEQUENCER button. The upper region of the DISPLAY will indicate “New Song”.
3. Press the RECORD button (the red button to the left of the DISPLAY).
4. Press the “Backing Sequence (Quick Record)” radio button in the display, and then press “OK”.
5. Press the BIG RED START / STOP button. You’ll hear a one bar count-off before recording begins…
6. Start Playing!
7. Press the Sequencer 1 PLAY / STOP button to stop recording. (Pressing the Start/Stop button will NOT stop the
sequencer!)
8. Press the PLAY / STOP button again, to hear your sequence. Ta – Da! You (and the Pa800) have just created a SONG!
Congratulations!
One of the great features of the Backing Sequencer is the ability to change what you’ve recorded easily. For
instance, if you like what you’ve recorded, but decide to use a different style - or want to change a chord(s) in your
progression, it can be done quickly, without having to re-play the parts…let’s view these edit functions, using your
current song…
9. Press the RECORD button to the left of the DISPLAY then select “Step Backing Sequence”, and then press “OK”.
10. In the lower region of the display, you can move one event, measure or step at a time and change the Style, Tempo,
Chord, etc. of your song with out having to re-record it.
11. To exit, press “Done”, and then press “Yes”.
6
Pa800 EasyStart
And now to save your song…
12. Press the ▼popup in the upper right of the display, and then select “Save Song”.
13. You can save to the internal memory, or to USB media, inserted in either of the front or rear USB 2.0 ports. Touch
“Save”.
14. Name your song by pressing the T next to “New Song”, and typing onscreen. Press “OK”, and then press “OK” again.
When prompted, “Are you Sure” press “Yes”.
The SongBook
The Pa800’s SongBook feature is a database of performance settings, standard MIDI files, and karaoke files that
you can search by name, tempo, key, meter or genre. It’s a great way to organize your favorite settings so that
you can get to them quickly and easily! You can even create custom lists so your set goes without a hitch.
1. Press the SONGBOOK button. Here you can scroll through the list of hundreds of exsisting entries. This could take
awhile. Let’s make things easier...
2. Press the “Filter…” box in the display. Here you can narrow your search down. As example: Pop songs that have a
tempo between 100 and 130 BPM. Press “Cancel” to exit this page.
3. Select one of the songs that you may be familiar with, and then Press the “Select” box in the display.
4. Press the START/STOP button to play the selected file.
Using the TC-Helicon Vocal Processor
The Pa800 includes a powerful Vocal Processor from TC-Helicon! It’s capable of producing three-part harmonies,
with selectable gender for each part. It even contains dedicated delay, compression, and reverb. From Barry White
to the Chipmunks and everything in between, your vocals will take on new life!
1. Press the SLIDER MODE button until “Mic” is lit. The ASSIGNABLE SLIDERS are now set to control volume and FX level!
2. Turn the rear panel MIC GAIN knob down, and set ASSIGNABLE SLIDER 1 (mic volume) near the top.
3. While talking/singing into the mic, adjust the rear panel MIC GAIN knob.
4. Go to either Style Play or Song Play mode, and touch the “Mic” tab on the bottom of the display.
5. In the display, you’ll see “VP: > 001 TC-Helicon”. Touch the arrow after “VP:” to choose a preset.
6. To remove the harmony parts, either push the HARMONY button or touch the icon with three mics.
Important Owner’s Manual References
Glossary of Terms
Style Record Mode
Sequencer operating mode
Media edit mode
25
106
170
222
293
298
Recognized chords
Troubleshooting
7
Pa800 EasyStart
Don’t forget to check the website often for OS updates and other useful downloads!
Options
VIF4 - Video Interface Board
A video interface board (PAL and NTSC compatible) ideal for
karaoke, showing lyrics directly on any monitor or TV screen.
Useful also to "mirror" in a TV the internal display
HDIK-1 - Hard Disk Installation Kit
Kit for installing a standard 2.5" ATA hard disk drive (Hard Disk
not included)
Hard Disk (not available from Korg)
You can use any standard 2.5" ATA hard disk drive (supported
capacity up to 2 Terabyte)
8
Pa800 EasyStart
EXP-2 - Expression/Volume Pedal
Connected to the Assignable Pedal socket, will provide various
control functions, like Master Volume, Keyboard Expression, Vdf
CutOff, etc. (depends on the Global settings)
XVP-10 - Professional Expression/Volume Pedal
Connected to the Assignable Pedal socket, will provide various
control functions, like Master Volume, Keyboard Expression, Vdf
CutOff, etc. (depends on the Global settings). Rugged
construction for professional use
EC5 - Assignable Multi-Switch Controller
Five-switches Foot Controller. Individual functions, like
Start/Stop, Bass Inversion, Synchro Start, etc., can be
programmed and saved in Global Mode
DS-1H - Damper Pedal
Professional, piano-style Damper pedal
PS-1 - Switch Pedal
Can be used for sustain when connected to the Damper socket.
Can also be used for connection to the Assignable Pedal socket,
providing various functions (depends on the Global settings)
Please note: Technical specifications are subject to change without notice.
9
|