Kramer Electronics TV Converter Box FC 14 User Manual

Kramer Electronics, Ltd.  
USER MANUAL  
Model:  
FC-14  
RGBHV to Component Transcoder  
 
Introduction  
1 Introduction  
Dedication by Kramer Electronics since 1981, to the development and  
manufacture of high quality video/audio equipment, makes the Kramer line  
an integral part of the finest production and presentation facilities in the world.  
In recent years, Kramer has redesigned and upgraded most of the line, making  
the best even better! The Kramer line of professional video/audio electronics  
is one of the most versatile and complete available, and is a true leader in  
terms of quality, workmanship, price/performance ratio and innovation. In  
addition to our high quality transcoders, we also offer excellent switchers and  
matrices, distribution amplifiers, remote controllers, processors, interfaces  
and computer-related products.  
Congratulations on purchasing your Kramer FC-14 RGBHV to Component  
Transcoder.  
This product is ideal for displaying RGB video on:  
ñ
Plasma monitors  
ñ
Other display devices equipped with component video inputs  
The package includes the following items:  
ñ
ñ
ñ
FC-14 RGBHV to Component Transcoder  
Power supply  
This user manual and the Kramer concise product catalog/CD  
2 Getting Started  
We recommend that you:  
ñ
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
ñ
Review the contents of this user manual  
3 Overview  
The high quality Kramer FC-14 RGBHV to Component Transcoder is an  
adjustment-free, multi-standard converter that converts RGB video to  
component video (Y, B-Y, R-Y, sometimes called YUV or Y, P , P ).  
b
r
The FC-14 supports different sync variants on the RGB inputs:  
ñ
Separate H & V (RGBHV)  
Separate composite sync (RGBS)  
Sync-on-green (RGsB)  
ñ
ñ
ñ
Sync-on-all (RsGsBs)  
1
 
Your RGBHV to Component Transcoder  
In addition, the FC-14:  
Recognizes any sync polarity and is compatible with both video level  
ñ
(0.3V) and TTL level syncs  
ñ
Transcodes any RGB video (progressive scan or interlaced) to component  
format, making it ideal for standard definition video as well as for  
high-definition video (VGA, SVGA and XGA)  
ñ
Uses high quality analog circuitry – eliminating the artifacts associated  
with digitizing and allowing the unit to operate with any video resolution!  
To achieve the best performance:  
ñ
Connect only good quality connection cables, thus avoiding interference,  
deterioration in signal quality due to poor matching, and elevated noise levels  
(often associated with low quality cables)  
ñ
Avoid interference from neighboring electrical appliances that may  
adversely influence signal quality and position your Kramer FC-14 in a  
location free from moisture and away from excessive sunlight and dust  
4 Your RGBHV to Component Transcoder  
Figure 1 illustrates the front and rear panels of the FC-14. Tables 1 and 2  
define the front and rear panels of the FC-14, respectively.  
Figure 1: FC-14 RGBHV to Component Transcoder  
2
KRAMER ELECTRONICS, LTD.  
 
Using Your RGBHV to Component Transcoder  
Table 1: Front Panel FC-14 RGBHV to Component Transcoder  
#
1
2
3
4
5
Feature  
Function  
POWER Switch Illuminated switch supplying power to the unit  
RGBHV Button Selects RGBHV as the input format  
RGBS Button  
RGsB Button  
Selects RGBS as the input format  
Selects RGsB as the input format  
RsGsBs Button Selects RsGsBs as the input format  
Table 2: Rear Panel FC-14 RGBHV to Component Transcoder  
#
1
2
3
4
5
6
7
8
9
Feature  
Function  
R IN BNC Connector  
G IN BNC Connector  
B IN BNC Connector  
H/S IN BNC Connector  
12V DC  
V IN BNC Connector  
R-Y OUT BNC Connector  
B-Y OUT BNC Connector  
Y OUT BNC Connector  
Connects to the component video source when selecting  
RGB/S or YUV as the input. Automatically detects  
whether RGBS or RGsB is input when in the RGB mode  
Connects to the horizontal sync input  
Power Connector 12 VDC, 80mA  
Connects to the vertical sync input  
Connects to the component video acceptor  
10 RGBHV IN DB15F Connector Connects to the component video source  
5 Using Your RGBHV to Component Transcoder  
You can use your FC-14 RGBHV to Component Transcoder to convert the  
following source signals to component video signals:  
ñ
ñ
ñ
ñ
An RGB source (see section 5.1)  
An RGBS source (see section 5.2)  
An RGBHV source (see section 5.3)  
A VGA source (see section 5.4)  
3
 
Using Your RGBHV to Component Transcoder  
5.1 Converting an RGB Source  
You can convert an RGB signal to Y, B-Y, R-Y, via a FC-14 RGBHV to  
Component Transcoder, as the example in Figure 2 illustrates, as follows:  
1. Connect the RGB video camera to the R, G and B BNC inputs.  
2. Connect the Y, B-Y, and R-Y outputs to the BETACAM VCR.  
3. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity.  
4. Press the RGsB input format selector.  
The camera’s RGB signal converts and outputs to the BETACAM VCR.  
5. Switch on the power.  
The Power switch illuminates.  
Figure 2: Converting from an RGB Camera to a BETACAM VCR  
4
KRAMER ELECTRONICS, LTD.  
 
Using Your RGBHV to Component Transcoder  
5.2 Converting an RGBS Source  
You can convert an RGBS signal to Y, B-Y, R-Y, via a FC-14 RGBHV to  
Component Transcoder, as the example in Figure 3 illustrates, as follows:  
1. Connect the RGBS workstation to the R, G, B and H/S BNC inputs.  
2. Connect the Y, B-Y, and R-Y outputs to the plasma monitor.  
3. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity.  
4. Press the RGBS input format selector.  
The RGBS workstation’s signal converts and outputs to the plasma  
monitor.  
5. Switch on the power.  
The Power switch illuminates.  
Figure 3: Converting from an RGBS Workstation to a Plasma Monitor  
5
 
Using Your RGBHV to Component Transcoder  
5.3 Converting an RGBHV Source  
You can convert an RGBHV signal to Y, B-Y, R-Y, via a FC-14 RGBHV to  
Component Transcoder, as the example in Figure 4 illustrates, as follows:  
1. Connect the high resolution graphics source to the R, G, B, H/S and V  
BNC inputs.  
2. Connect the Y, B-Y, and R-Y outputs to the plasma monitor.  
3. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity.  
4. Press the RGBHV input format selector.  
The signal from the RGBHV high resolution graphics source converts and  
outputs to the plasma monitor.  
5. Switch on the power.  
The Power switch illuminates.  
Figure 4: Converting from a High Resolution Graphics Source to a Plasma Monitor  
6
KRAMER ELECTRONICS, LTD.  
 
Using Your RGBHV to Component Transcoder  
5.4 Converting a VGA Source  
You can convert and output a VGA signal (or SVGA, XGA, UXGA) to Y,  
B-Y, R-Y, via a FC-14 RGBHV to Component Transcoder, as the example in  
Figure 5 illustrates, as follows:  
1. Connect the VGA graphics source to the RGBHV DB15F input  
connector.  
2. Connect the Y, B-Y, and R-Y outputs to the plasma monitor.  
3. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity.  
4. Press the RGsB input format selector.  
The signal from the RGsB VGA graphics source converts and outputs to  
the plasma monitor.  
5. Switch on the power.  
The Power switch illuminates.  
Figure 5: Converting from a VGA Graphics Source to a Plasma Monitor  
7
 
Technical Specifications  
6 Technical Specifications  
Table 3 includes the technical specifications:  
Table 3: Technical Specifications of the FC-14 RGBHV to Component Transcoder  
Inputs:  
Outputs:  
R, G, B, H/S and V on BNC connectors; RGBHV IN on a DB15F connector  
1 component video - (Y, B-Y, and R-Y) on BNC connectors  
Video Bandwidth: 120 MHz -3dB  
Max. Video Level: 1.5 Vpp @ green input  
Non Linearity:  
Video S/N:  
Differential Gain:  
0.3%  
60 dB  
0.1%  
Differential Phase: 0.4 Deg  
K-Factor:  
<0.05%  
Control:  
4 selector buttons  
Dimensions:  
Power Source:  
Weight:  
22cm x 18cm x 4.5cm (8.6" x 7" x 1.8") W, D, H.  
12 VDC, 80mA  
1.2 kg. (2.65 lbs.) approx.  
Power supply  
Accessories:  
8
KRAMER ELECTRONICS, LTD.  
 
LIMITED WARRANTY  
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the  
following terms.  
HOW LONG IS THE WARRANTY  
Labor and parts are warranted for three years from the date of the first customer purchase.  
WHO IS PROTECTED?  
Only the first purchase customer may enforce this warranty.  
WHAT IS COVERED AND WHAT IS NOT COVERED  
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered  
by the warranty:  
1.  
Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are  
uncertain as to whether dealer is authorized, please contact Kramer at one of the agents listed in the web site  
a
2.  
3.  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
i)  
ii)  
iii)  
iv)  
v)  
Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature  
Product modification, or failure to follow instructions supplied with the product  
Repair or attempted repair by anyone not authorized by Kramer  
Any shipment of the product (claims must be presented to the carrier)  
Removal or installation of the product  
vi)  
vii)  
Any other cause, which does not relate to a product defect  
Cartons, equipment enclosures, cables or accessories used in conjunction with the product  
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR  
We will pay labor and material expenses for covered items. We will not pay for the following:  
1.  
2.  
Removal or installations charges.  
Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the  
responsibility of the Kramer dealer from whom the product was purchased.  
3.  
Shipping charges.  
HOW YOU CAN GET WARRANTY SERVICE  
1.  
2.  
To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.  
Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage,  
and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and  
a description of the problem(s).  
3.  
For the name of the nearest Kramer authorized service center, consult your authorized dealer.  
LIMITATION OF IMPLIED WARRANTIES  
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to  
the length of this warranty.  
EXCLUSION OF DAMAGES  
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer  
shall not be liable for:  
1.  
Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss  
of time, commercial loss; or:  
2.  
Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an  
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitations and exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.  
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.  
This equipment has been tested to determine compliance with the requirements of:  
EN-50081:  
"Electromagnetic compatibility (EMC);  
generic emission standard.  
Part 1: Residential, commercial and light industry"  
"Electromagnetic compatibility (EMC) generic immunity standard.  
Part 1: Residential, commercial and light industry environment".  
FCC Rules and Regulations:  
EN-50082:  
CFR-47:  
Part 15: “Radio frequency devices  
Subpart B – Unintentional radiators”  
CAUTION!  
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to  
the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.  
Use the supplied DC power supply to feed power to the machine.  
Please use recommended interconnection cables to connect the machine to other components.  
9
 
For the latest information on our products and a list of Kramer  
Updates to this user manual may be found at  
We welcome your questions, comments and feedback.  
Kramer Electronics, Ltd.  
P/N: 2900-004017 REV 2  
 

JL Audio Car Speaker SB GM BURB 10W3 User Manual
JVC Personal Computer LYT1116 001A User Manual
JVC Portable CD Player XL PG3B User Manual
Keating Of Chicago Oven Cooking Station User Manual
Kingston Technology Computer Drive SVP200S3 90G User Manual
KitchenAid Cooktop YKECD805H User Manual
KitchenAid Ice Maker W10136912C User Manual
KitchenAid Trash Compactor KFCK03ITWH0 User Manual
Klipsch Portable Speaker r2800com User Manual
Kowa Inflatable Bouncy Toy fm600 User Manual