MA0212-A
USER’S GUIDE DQS-30
GENERAL GUIDE
1SNOOZE button
Pressing this button while the alarm is sounding stops the alarm.
UP
SNOOZE
2LIGHT button
Press to turn on the backlight.
ON
SET
RESET
OFF
DOWN
3Alarm Time Set button
Use this button to change the alarm time or current time setting.
4SET button
Use this button when setting the current time.
5RESET button
Press to reset the clock after replacing the battery.
6Alarm Switch
Use this switch to turn the alarm on and off, and to turn on the snooze alarm.
7Solar panel
8Insulation sheet
Pull out the insulation sheet in the direction indicated by the arrow before using the clock.
After removing the insulation sheet, press the RESET button (5).
SETTING THE TIME
SNOOZE
1. Press the SET button (4) to cycle through the setting screens as shown below.
LIGHT
Normal Timekeeping Screen
• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out
the insulation sheet in the direction indicated by the arrow before using the clock.
• After removing the insulation sheet, press the RESET button (5).
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Year Setting Screen
12-hour/24-hour Timekeeping Screen
Alarm Off
Alarm On
Snooze on indicator
Alarm time
DATE (month - date) Day of the week
Month and Day Setting Screen
Time Setting Screen
PM indicator Current time
(Hour, minutes, seconds)
Alarm on indicator
1
|
Nokia 5170i User Manual
Kenwood KDC W4537U User Manual
Kenwood CD Player KDC U353 User Manual
Huawei Technologies Cell Phone C8800 User Manual
Emerson HD8150 User Manual
Dynex DX CDRW52 User Manual
CyberPower Computer Drive CP H420P User Manual
Clarion BD216 User Manual
Braun CafHouse KF 500 User Manual
Black Box LTD8 User Manual