CD RECEIVER
KD-SX650
KD-SX650
KD-SX650
RECEPTOR CON CD
RECEPTEUR CD
ATT
BAND
PROG
DISC
FUNC
DISC
PRESET
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
FSUN3103-631
[J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
BASIC OPERATIONS....................................................4
RADIO OPERATIONS...................................................5
Listening to the radio ..................................................................... 5
Storing stations in memory ............................................................ 6
FM station automatic preset: SSM ............................................... 6
Manual preset.............................................................................. 7
Tuning into a preset station ........................................................... 8
Other convenient tuner functions ................................................. 9
Scanning broadcast stations ........................................................9
Selecting FM reception sound......................................................9
Changing the AM/FM channel intervals ....................................... 9
CD OPERATIONS.......................................................10
Playing a CD ................................................................................. 10
Locating a track or a particular portion a CD .......................... 11
Selecting CD playback modes...................................................... 12
Other convenient CD functions ................................................... 12
Prohibiting CD ejection.............................................................. 12
SOUND ADJUSTMENTS .............................................13
Adjusting the sound...................................................................... 13
Turning on/off the loudness function ............................................... 14
Using the Sound Control Memory .............................................. 15
Selecting and storing the sound modes ..................................... 15
Recalling the sound modes ........................................................16
Canceling Advanced SCM ........................................................... 17
Storing your own sound adjustments ......................................... 18
OTHER MAIN FUNCTIONS .........................................19
Setting the clock ............................................................................ 19
Selecting the level display ............................................................ 21
Detaching the control panel ......................................................... 22
REMOTE OPERATIONS...............................................23
Installing the batteries.................................................................. 23
Using the remote controller ......................................................... 23
CD CHANGER OPERATIONS ......................................24
Playing CDs ................................................................................... 24
Selecting CD playback modes...................................................... 26
EXTERNAL COMPONENT OPERATIONS ..................... 27
Selecting the external component to use..................................... 28
MAINTENANCE.........................................................29
Handling CDs ................................................................................ 29
TROUBLESHOOTING .................................................30
SPECIFICATIONS .......................................................31
3
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 19.
2
1
2
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
Select the source.
C D
FM/AM
To operate the tuner, see pages 5 – 9.
To operate the CD player, see pages 10 – 12.
To operate the CD changer, see pages 24 – 26.
To operate the external component, see pages 27 – 28.
CD-CH
3
4
Adjust the volume.
Volume level appears
Volume level indicator
Adjust the sound as you want (see pages 13 – 18).
To drop the volume in a moment
Press
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second.
4
RADIO OPERATIONS
Listening to the radio
1
FM/AM
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
FM1
FM2
FM3
AM
Audio or volume level indicator
selected band appears
2
To search stations
of higher
frequencies.
Start searching a station.
When a station is received, searching stops.
To search stations
of lower
frequencies.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Select the band (FM or AM).
Press FM/AM repeatedly.
2 Press and hold
Now you can manually change the frequency while “M” is flashing.
3 Press ¢ or 4 repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
¢ or 4
until “M” starts flashing on the display.
5
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
1
FM1
FM2
FM3
AM
FM/AM
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
2
SSM
Press and hold the both buttons for more than
2 seconds.
“SSM” appears, then disappears when
automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3).These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
6
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
3
2
1
2
Select the FM1 band.
FM/AM
Tune into a station of 88.3 MHz.
See page 5 to tune into a station.
3
Press and hold the button for more than 2
seconds.
“P1” flashes for a few seconds.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
7
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 6
and 7.
2
1
1
2
FM/AM
Select the band (FM1, FM2, FM3 or AM) you
want.
FM1
FM2
FM3
AM
Select the number (1 – 6) for the preset station
you want.
8
Other convenient tuner functions
MO/RND
Control dial
¢
SCAN
SEL
Scanning broadcast4stations
When you press SCAN while listening to the radio, station scanning starts. Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes
on the display), and you can check what program is now being broadcasted.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you
hear becomes monaural but reception will be improved.
A
Lights up when receiving an FM broadcast in stereo.
To restore the stereo effect, press the same button again.
Changing the AM/FM channel intervals
When using this unit in an area other than North or South America:
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM.You can change the channel intervals by following the procedure below.
1 Press SEL (select) for more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL” , “AREA” or “LINE IN*” appears on the display.
Displayed only when one of the following sources is selected — FM, AM and CD.
*
2 If “AREA” does not appear, press
¢ or 4
until it appears.
3 Rotate the control dial clockwise.
“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for
manual tuning) / 100 kHz (for searching) for FM.
To reset to the factory setting, follow the above step 1 and 2, then rotate the control dial
counterclockwise in step 3 (“AREA US” appears on the display).
AREA EU: Select this when used in an area other than North and South America.
AREA US: Select this when used in North or South America.
9
CD OPERATIONS
Playing a CD
0
1
1
Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
• When a CD is inserted upside down, “EJECT” appears on
the display and the CD automatically ejects.
A
A
Total playing time of
the inserted disc
Total track number
of the inserted disc
Elapsed playing
time
Current track
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted
for the tuner, for example, the speakers may be damaged by the sudden increase in the
output level. Therefore, lower the volume before playing a CD and adjust it as required
during playback.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects from the loading slot. The source changes to
the tuner (you will hear the last received station).
If you change the source to FM/AM or CD-CH, the CD play also stops (without ejecting the
CD this time).
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
10
Locating a track or a particular portion on a CD
Number buttons
¢
4
To fast forward or reverse the track
Press and hold
¢, while playing a CD, to fast forward the track.
Press and hold 4 , while playing a CD, to reverse the track.
To go to the next track or the previous track
Press
¢ briefly, while playing a CD, to go ahead to the beginning of
the next track. Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of the
current track. Each time you press the button consecutively, the beginning
of the previous tracks is located and played back.
To go to a particular track directly
7
8
9
10
11
12
Press the number button corresponding to the track number to start its
playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
11
Selecting CD playback modes
MO/RND
RPT
To play back tracks at random (Random Play)
You can play back all tracks on the CD at random.
MO/RND
Each time you press MO/RND (Mono/Random) while playing a CD, CD
random play mode turns on and off alternatively.
When the random mode is turned on, the RND indicator lights up on the
display and a track randomly selected starts playing.
To play back tracks repeatedly (Repeat Play)
You can play back the current track repeatedly.
Each time you press RPT (Repeat) while playing a CD, CD repeat play
mode turns on and off alternatively.
RPT
When the repeat mode is turned on, the RPT indicator lights up on the
display.
Track number of the currently playing track
Other convenient CD functions
Prohibiting CD ejection
You can prohibit the CD ejection and can “lock” a CD in the loading slot.
Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about
5 seconds, and the CD is “locked.”
To cancel the prohibition and “unlock” the CD, press and hold CD and 0 for more than 2
seconds again. “EJECT” appears on the display, and the CD ejects from the loading slot.
12
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the treble/bass sound and the speaker balance.
2
Equalization pattern indicator
1
1
Select the item you want to adjust.
Indication
To do:
Adjust the bass
Range
BAS
–6 (min.) — +6 (max.)
(Bass)
TRE
Adjust the treble
–6 (min.) — +6 (max.)
(Treble)
FAD
(Fader)*
Adjust the front and rear speaker
balance
R6 (rear only) — F6 (front only)
L6 (left only) — R6 (right only)
00 (min.) — 50 (max.)
BAL
Adjust the left and right speaker
(Balance) balance
VOL
Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Equalization pattern changes as
you adjust the bass or treble.
Note:
Normally the control dial works as the volume control. So you do
not have to select “VOL” to adjust the volume level.
13
Turning on/off the loudness function
The human ear is less sensitive to low and high frequencies at low volumes.
The loudness function can boost these frequencies to produce well-balanced sound at low
volume level.
Each time you press LOUD, the loudness function turns on and off alternatively.
LOUD
@A
14
Using the Sound Control Memory
You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored each of the following sources — FM1,
FM2, FM3, AM, CD, CD changer and external components.
• If you do not want to store the sound mode separately for each playback source, but want to
use the same sound mode for all the sources, see “Canceling Advanced SCM” on page 17.
1
”Link“ indicator
and sound mode
indicators
Equalization pattern indicator
1
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows.
SCM
• If the “Link” indicator is lit on the display (with “SCM LINK” set to “LINK
ON” — see page 17), the selected sound mode can be stored in
memory for the current source, and the effect applies to the current
source.
• If the “Link” indicator is NOT lit on the display (with “SCM LINK” set to
“LINK OFF”), the selected sound mode effect applies to any source.
Indication
For:
Preset values
Bass
00
Treble
00
Loudness
SCM OFF
BEAT
(Flat sound)
On
On
Off
Off
Rock or disco music
Quiet background music
Light music
+2
00
SOFT
+1
–3
POP
+4
+1
15
Recalling the sound modes
1
1
Select the source while the “Link” indicator
C D
is lit on the display.
The “Link” indicator starts flashing, and the sound mode
stored in memory for the selected source is recalled.
FM/AM
CD-CH
Equalization pattern of the
selected sound mode appears.
Notes:
• You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 18.
• To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily,
see pages 13 and 14. Your adjustments will be cancelled if another source is selected.
16
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
LINK ON: Advanced SCM (different SCMs for different sources)
LINK OFF: Conventional SCM (one SCM for all sources)
3
1, 4 2
1
Press and hold SEL for more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL,” “AREA” or
“LINE IN*” appears on the display.
* Displayed only when one of the following sources is selected —
FM, AM and CD.
2
Select “SCM LINK”if not shown on the display.
3
Select the desired mode — “LINK ON” or
“LINK OFF”.
4
Finish the setting.
17
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and
store your own adjustments1in,m4emory.
3
2
2
SCM
1
2
Call up the sound mode you want to adjust.
See page 15 for details.
Within
5 seconds
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
LOUD
To turn on or off the loudness function
Each time you press LOUD, the loudness
function turns on and off alternatively. ( go to step 4)
Within
5 seconds
3
4
5
Adjust the bass or treble level.
See page 13 for details.
Within
5 seconds
Press and hold SCM until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
SCM
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 15.
18
OTHER MAIN FUNCTIONS
Setting the clock
1
2
Press and hold SEL for more than 2
seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL”,
“AREA” or “LINE IN*” appears on the display.
* Displayed only when one of the following sources is
selected — FM, AM and CD.
1.
Set the hour.
1. Select “CLOCK H” if not shown on the
display.
2.
2. Adjust the hour.
1.
3
4
Set the minute.
1. Select “CLOCK M.”
2.
2. Adjust the minute.
Start the clock.
19
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation:
During CD operation:
Elapsed
playing time
Clock
Clock
Frequency
During CD changer operation:
During external component operation:
Elapsed
Disc
Clock
playing time number
LINE IN
Clock
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.
20
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
AUDIO1: Shows the audio level indicator and the equalization pattern indicator.
AUDIO2: Alternates “AUDIO 1” setting and illumination display.
OFF:
Erases the audio level indicator and the equalization pattern indicator.
Equalization pattern indicator
Level indicator
1
Press and hold SEL for more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL,” “AREA” or
“LINE IN*” appears on the display.
* Displayed only when one of the following sources is selected —
FM, AM and CD.
2
3
4
Select “LEVEL” if not shown on the display.
Select the desired mode —“AUDIO1”,
AUDIO2” or “OFF”.
Finish the setting.
21
|